Brief introduction
Tianji Transmission TJ-POD-A hollow shaft magnetic powder brakes(hollow shaft coupling/center ring install/rotainal shell),the cooling mode is natural cooling, rotary peripheral to improve thermal performance, improved thermal capacity models, 5r / min from the available use.
Characteristics of the magentic powder brakes are as follows:
1, you can easily control a larger range, good linearity;
2, to achieve the effect of continuous operation and stable sliding torque;
3, the use of imported bearings, environmental noise, running fairly quiet and smooth;
4, using magnetic powder imported high heat resistance, long life, and the heat capacity is relatively large.
5, the ideal structure and design, and it can achieve a continuous and smooth driving condition;
6, imported wool felt, effectively preventing the leakage of magnetic particles;
7, high precision, concentricity of less than 0.01mm;
Installation Notes:
1. Be sure the bracket is fitted to the fitting and tighten the mounting plate is good
2, The hollow shaft magnetic brakes side of the insertion shaft and load shaft concentricity must be controlled within 0.05mm, as is the outer periphery of the rotating, so be sure to use a well-ventilated wire mesh and other devices.
Model TJ-POD-A | 0.6KG | 1.5 KG | 2.5 KG | 5 KG | 10 KG | 20 KG | 40 KG | |
Rated torque (N-m) | 6 | 12 | 25 | 50 | 100 | 200 | 400 | |
Current (A) | 0.3 | 0.39 | 0.73 | 0.94 | 1.21 | 1.9 | 2.2 | |
Allowable rational speed (r/min) | 1800 | 1800 | 1800 | 1800 | 1800 | 1000 | 1000 | |
Power (W) | 130 | 320 | 450 | 700 | 900 | 1900 | 2600 | |
Outline dimension | D | 128 | 160 | 180 | 220 | 275 | 335 | 360 |
L | 68 | 88 | 98 | 115 | 136 | 160 | 210 | |
Hollow shaft size | d(h7) | 12 | 18 | 20 | 30 | 35 | 45 | 50 |
b(F8) | 4 | 5 | 6 | 8 | 10 | 14 | 12 | |
L1 | 4 | 2 | 5 | 5 | 6 | 8 | 8 | |
Fixed stator size | L2 | 2 | 5 | 5 | 5 | 5 | 6 | 6 |
D1(g7) | 70 | 74 | 100 | 110 | 120 | 160 | 160 | |
D2 | 80 | 100 | 140 | 150 | 150 | 240 | 240 | |
n-d1*深度 | 3-M5*10 | 3-M6*10
| 3-M10*19
| 3-M10*19
| 6-M10*22
| 6-M10*30
| 6-M10*30
|