Operational Matters Needing Attention When Replacing Magnetic Powder
Release Date:20/04/2019
1. Prepare the folding tools, cleaning tools and new magnetic powder;
2. The magnetic powder is prepared in sufficient quantities, please refer to the specification sheet corresponding to the instruction manual;
3. Disassemble in order, clean up the remaining magnetic powder and inner wall, and enclose a sufficient amount of magnetic powder (g);
4. Note that there is wool felt at the seal between the cover and the stator. It is not possible to replace the wool felt with cloth/cotton;
5. Each fixing bolt should be fastened in place, and there should be no deviation or looseness;
6, test run for more than 2 hours, during the test run to observe whether there are noise, leakage magnetic powder, unstable torque and other abnormalities.
Prev: Magnetic powder clutch replacement
Next: What Is The Role Of The Electromagnetic Brake And The Clutch?