Dry Electromagnetic Brake Noise Elimination Method
Release Date:12/11/2019
There are many reasons for the noise generated by dry electromagnetic brakes. Only by recognizing the situation that causes noise, can we quickly solve the problem. The following are some common causes of noise failure and troubleshooting methods:
1. Check if the friction plate is damaged: Check whether the material of the friction plate or the rivet head of the riveted friction plate is normal. If it is not normal, the friction plate will fall off, which may cause the metal and metal to directly go during the braking process. contact. This will not only affect the distance of the safety brake, but also cause a relatively large damage to the rotor surface. If this is the case, a new friction plate must be replaced, and the broken rotor should be repaired accordingly.
2. Check whether there is sludge or rust on the edge of the brake disc and the brake caliper: it should be cleaned during inspection. If it is rusted, it needs to be rust-treated. If it is serious, it should be replaced.
3. Check if the brake caliper is centered: the electromagnetic brake caliper is not centered, which will cause the brake disc to be scratched by metal particles. Therefore, it must be carefully checked during the overhaul process, and if the brake caliper is installed, the ear hole is not It is best to replace it with new parts if it is too smooth or damaged.
4. Check if the bearing ring is fixed: Check whether the bearing ring of the dry electromagnetic brake is fixed. If it is not fixed, it needs to be reinforced.
Tianji Transmission, 14 years of professional manufacturer of electromagnetic brake clutch, quality assurance, three months replacement for one year warranty.
Buy Brake Motor Electromagnetic Brake now:
Prev: Magnetic powder clutch replacement
Next: Safety chuck application