Correct Use Of Worm Gear Reducer Steps
Release Date:18/11/2019
The in-depth understanding of the worm gear reducer can make the reducer last longer, so what is the correct use step for the user when using the worm gear reducer? The worm gear reducer has high wear resistance and the load carrying capacity is an excellent reduction drive in the industry. The manufacturer of the reducer of the Taiwan machine shares the correct use steps of the worm gear reducer.
1. After the worm gear reducer is running for 200~300 hours, the oil should be changed for the first time. In the future use, the quality of the oil should be checked regularly. For the mixed impurities or deteriorated oil, it must be replaced in time. In general, for long-term continuous operation of the reducer, the new oil is replaced by 5000 hours of operation or once a year. Gearboxes that have been deactivated for a long time should be replaced with new oil before re-running. The reducer should be added with the same brand number of oil as the original, and should not be mixed with the oil of different brand numbers. The oils with the same grade and different viscosity are allowed to be mixed.
2. When changing oil, cut off the power supply of the transmission to prevent inadvertent energization. When the worm gear reducer cools down without burning danger, it should be kept warm, because after the complete cooling, the viscosity of the oil increases and it is difficult to drain the oil.
3. When the oil temperature rise exceeds 80 °C or the oil pool temperature exceeds 100 °C and abnormal noise is generated during work, stop using it. Check the cause, remove the fault, and replace the lubricating oil before continuing operation.
4. The input power range of the worm gear reducer is between 100W and 30KW, the output torque is between 4NM and 3000NM, the input shaft speed is generally not more than 1800 rpm, and the high speed shaft can be operated in both forward and reverse directions. When the working environment temperature is lower than 0 °C, the lubricating oil must be heated to 0 °C before starting. When the working environment temperature is higher than 40 °C, cooling measures must be taken.
The above four points are the method steps for the correct use of the worm gear reducer. If you want to buy a worm gear reducer, you can consult the Taiji reducer manufacturers, to provide you with quality products and affordable prices, your trust is our greatest support.
Now buy Worm Gear Reducer:
Prev: Magnetic powder clutch replacement
Next: Advantages Of Positive And Negative Rotating Electromagneti Clutch