How to install worm gear speed reducer
Release Date:12/01/2016
--The mounting on the machine must be stable to avoid any vibration.
--Check the correct direction of rotation of the reduction unit output shaft before fitting the unit to the machine.
--In the case of particularly lengthy periods of storage (4-6 months) if the oil seal is not immersed in the lubricant
inside the unit,It is recommended to change it since the rubber could stick to the shaft or even has lost the elasticity
it needs to function properly. speed reducer, gear reducer
--For a shaft mounting, for reduction units with a hollow output shafts, use the torque arms we can supply. If it is not
possible,make sure that the constraint is axially free and with such play as to ensure free movement for the reduction
unit.
--Whenever possible, protect the reduction unit against solar radiation and bad weather.
--Ensure the motor cools correctly by assuring good passage of air from the fan side.
--In the case of ambient temperatures <-5°C and >+40°C contact technical advise service .
--The various parts ( pulleys, gear wheels, couplings, shafts, etc.) must be mounted on the solid or hollow shafts
using special holes or other systems that anyhow ensure correct operation without risking damage to the bearings
or external parts of the unit
--Painting must definitely not go over rubber parts and the holes on the breather plugs, if there are any.
--Taking out the seal embolism of the oilhole.
--Check the height of the oil level.
--Supposing the gear unit have not coupled with the motor,please pay attention to the following items to make sure
rightly connection. Mounting to B5,B14
--Check whether the tolerance between the shaft and motor flange fit for the essential standard.
--Washing the dirt and the paint on the surfaces of the shaft,center bore and the flange.
--Mounting avoid the gear unit incur strength .
--Check the position and the difference of the motor keyslot.
--Lubricate the surfaces in contact to avoid seizure or oxidation. speed reducer, gear reducer, reducer, reducer motor, worm reducer, worm gear reducer, gear speed reducer, geared speed reducer, gear reducer motor, worm-gear speed reducer, worm gear, morse gear reducer, reducing, single reducer, double reducer, double-shaft reducer
--Starting must take place gradually, without immediately applying the maximum load.
--When there are parts objects or materials under the motor drive that can be damaged by even limited spillage of oil, special protection should be fitted.