Magnetic Powder Clutch For Use On The Printer
Release Date:20/07/2019
As we all know, the printer works in the process of paper feeding in and out. It relies on the magnetic powder clutch to adjust the torque of the buffer start and overload protection on the winding printer, which enables the winding product to be completely wound. The performance of the printer is not achieved by the pull-off operating characteristics of the printed material received.
The magnetic powder clutch used in the printer requires a miniature magnetic powder clutch with a relatively small torque, which is generally within 5 Nm. In addition, there are no standard parts for the magnetic powder clutch on the printer, because the printer design and structure produced by each manufacturer are different and vary. Therefore, the printer magnetic powder clutch is basically selected according to the actual design and installation of the device.
Because the shape of the magnetic powder clutch is small, the structure is compact and simple, the components are easy to disassemble and assemble, the transmission efficiency is high, and the response speed is fast. Therefore, it is necessary to pay attention to the use method between the two in the installation. The magnetic powder clutch is a double extension shaft. The input shaft and the output shaft are clearly defined and must not be installed in reverse. If the structure of the printer is special, be sure to install the output and the input shaft in reverse. Be sure to use it below 1000R/MIN. Because the installation in the opposite direction will cause the equipment to idling for a long time, the magnetic powder will be greatly shortened when it is stirred. Its service life.
With the rapid development trend of China's processing and manufacturing industry and social and economic development, production and manufacturing enterprises continue to independently research and develop products and products to seize market initiative. The scope of magnetic powder clutch use is also wider and wider. It is important to check whether the equipment of the product meets the standard, and the magnetic powder clutch manufacturer wants to get the favor of the manufacturing enterprise, not only put the price and cost performance first, but the most important thing is that the manufacturer strictly controls the quality and quality, and the quality and quality are good or bad. It is the first decision to decide the need for magnetic powder brakes. Tianji Transmission is a 14-year company that focuses on product quality. If you need a clutch brake, you can choose to use the transmission.
Selection, quotation.Order service hotline:15362446678 Sandra
Prev: Slitting Machine receives the volume with special brake controller
Next: Automatic Tension Controller Can Help The Winding And Unwinding Industry