The Magnetic Powder Clutch Has Voltage But Does Not Turn. What Is The Situation?
Release Date:05/08/2019
The magnetic powder clutch or brake uses a rated voltage of DC24V, which allows free and wide-range control of the torque by adjusting the excitation current. Then, in the process of working, there may be a phenomenon of jamming or turning, and it occurs when the current/voltage is turned on. Recently, some users have feedback current/voltage, but they can't turn up and get stuck. What caused it?
1, the use of inferior magnetic powder will also cause the card to die, check and clean up in time to replace the new magnetic powder;
2, If the concentricity is insufficient and the concentricity between the output and the input shaft is insufficient, it is recommended to repair it in time;
3, assembly quality problems, the stator, the cover, the end cover is not installed in place, it is recommended to reassemble in time;
4, magnetic powder leakage This is the most common phenomenon, it is also easy to cause the rotation and jam, the reason is in the quality of sealing and assembly;
5, bearing damage, this is generally rare, occasionally appear. Unless caused by gravity or quality problems;
More types and specifications of products Selection, quotation, order welcome to consult!!!
Prev: Magnetic Powder Clutch Can Be Used On The Packaging Machine