The Solution When The Magnetic Powder Clutch Brake Is Stuck
Release Date:05/11/2019
Tianji transmission manufacturers share the solution when the magnetic powder clutch brake is stuck:
1.Check the bearing and check if the bearing has cracking or deformation. If so, please replace it in time;
2. Check if there is magnetic powder leakage around the magnetic powder clutch and brake bearing. If it is, please clean it in time and check whether the components are assembled properly. The reason for the magnetic powder leakage is that the manufacturing precision is low;
3. Concentricity, the concentricity of the magnetic powder clutch and the brake rotor (stator) is insufficient, and it is easy to cause jamming;
4. When the magnetic powder is replaced, the sealing amount is too much or the excitation work is not performed at the startup. These are the causes of the magnetic powder clutch and the brake being stuck.
If you encounter other magnetic powder clutch technical problems or selection schemes, you can consult the online customer service online service 24 hours a day.
Click On Magnetic powder clutch and brake product:
Prev: Magnetic Powder Clutch Can Be Used On The Packaging Machine
Next: Magnetic Particle Clutch Controller Installation Instructions