Installation Notes of Electromagnetic brakes
Release Date:26/01/2015
Installation Notes of Electromagnetic brakes
1, there is no moisture in the use of the electromagnetic brake under the state of the oil classification, if the friction parts of the water and oil stained grading material will greatly reduce the friction torque, brake sensitivity will deteriorate, in order to avoid the use of these cases, additional cover.
2, in the dust a lot of places to use, set the brake is all in the box. 60KGM following the electromagnetic brake may be used upright, even more models may also be used.
3, used to install the long axis dimensions brakes use TJ-B D specifications. Key is used for the shaft in use under the TJ-B b one.
4, taking into account the thermal expansion and other factors, the mounting shaft thrust Please select 0.2MM less.
5, please attracting gap in the mechanical installation will be adjusted to within plus or minus 20% of the specified values.
6. Please keep the carriage light, do not use the brakes bearings under heavy pressure.
7, on the assembly with screws, use a spring metal sheet, then agents were prevented relaxation treatment.
8, the use of the mechanical side of the frame to maintain the lead, while also really like the use of the terminal board connections.
Electromagnetic clutches, electromagnetic clutch two lines do not need to divide positive and negative, as long as the folio connected, through the control switch control, and output rated voltage DC24V to electromagnetic clutches and brakes can be. Other similar products include magnetic clutch, magnetic clutch is the same, the two lines do not divide positive and negative, through the tension controller and other input rated DC 24 V can.
Prev: Is the first one