Characteristics And Precautions Of Stepless Variable Speed Motor
Release Date:25/11/2019
About the characteristics of the Speed Variator Motor and the use of time to pay attention to matters, so that the majority of customers better understand the characteristics of the variable speed motor and the use of how to extend the life of the machine.
Characteristics:
1. High strength, reliable performance and precise rotation when adding impact or machine reversal;
2. Large shifting range, high speed regulation accuracy, stable performance, small size and light weight;
3. The transmission parts are subjected to special heat treatment to precisely process the friction parts;
4. Good lubrication, stable operation, low noise and long service life;
5, good interface characteristics, easy to shift. Quick and reliable shifting, etc. during operation, regardless of whether it is under load;
6. It has strong combination ability and can be combined with various types of reducers to achieve the shifting effect of low speed and large torque gauge;
7. The set speed can be constant under the condition of allowing the load;
8, fully enclosed mechanical shifting, can be used in wet, dusty, slightly corrosive working environment.
Use matters:
1. When installing the horizontal and vertical stepless speed changer, the center line elevation of the machine should be calibrated and the coaxiality of the drive shaft should be calibrated, which should not exceed the allowable range of the coupling.
2. The output shaft is equipped with a coupling, a pulley, etc., and cannot be tapped. The coupling member should be screwed into the screw with the screw hole at the outer end of the output shaft.
3. Add the specified lubricant before using the continuously variable transmission, and the oil level must exceed the oil mirror center.
4. Under normal circumstances, the adjustment limit screw of the new factory-less stepless speed changer has been adjusted to the limit position, and should not be adjusted at will to avoid damage to the parts.
5. It can be operated in the forward and reverse directions, but it must not exceed the rated torque. At the same time, the maximum number of starts per minute of the motive power input is recommended to be controlled below 6 times.
Note:that too high a starting frequency will affect the life of the stepless transmission. For the replacement of lubricating oil and maintenance work, please refer to the instruction manual of the stepless transmission for details.
For additional technical details, please contact us.