NMRV Worm Gear Reducer Cooling Method
Release Date:26/11/2019
In order to improve the efficiency of NMRV worm reducer, the design of worm reducer adopts nonferrous metal, and the main material is hard steel. In order to reduce the loss caused by high-temperature operation, Taiji reducer manufacturers suggested that effective measures should be taken to reduce the temperature of NMRV worm gear and worm reducer. The following 5 points can be referred to:
1. Install a cooling coil in the oil tank of the box body, in which the cooling water takes away part of the heat of the lubricating oil.
2. Fan cooling. Fan is installed on the overhanging shaft of worm to increase heat dissipation and achieve cooling.
3. Heat dissipation fins are added outside the box to increase the heat dissipation surface.
4. Install the lubricating oil external circulation device to reduce the oil temperature.
5. The operating temperature of worm gear reducer should be controlled at -40" C~60. C. When the ambient temperature is higher than '60" c, the temperature should be lowered, using lubricating oil with low freezing point.
Above is the effective cooling method of NMRV worm gear reducer, want to know more about the NMRV worm gear reducer product related technical problems or selection of quotation, you can contact the customer service on the right side of the page, 14 years manufacturing experience Taiji reducer factory wholeheartedly for your service.
Prev: Magnetic powder clutch replacement
Next: Worm Gear Reducer Can Be Used With Electromagnetic Brake