A magnetic powder clutch is a special type of electromagnetic clutch which does not use friction plates. Instead, it uses a fine powder of magnetically susceptible material (typically stainless steel) to mechanically link an otherwise free wheeling disc attached to one shaft, to a rotor attached to the other shaft. When a magnetic field is applied to the powder, it forms chains connecting the disc and rotor. The strength of the chains depends on the strength of the magnetic field. We use the finest materials available for magnetic components to yield high friction indexes, as well as premium non-asbestos linings to improve response time and extend working life. We will be reliable brake supplier for you.
Specifications:
Maintenance knowledge:
Magnetic powder clutch DC power supply for excitation. Magnetic powder clutch during transport, often using the magnetic particle build-up somewhere, andsometimes even a "stuck" phenomenon. As long as the Magnetic powder clutch the whole time turning 180 degrees, beating with wooden hammer several times, so that loose powder off. Or turn the lever around the shaft, so long as immediately after turning. Connection with the coupling section of the clearance fit on the proposed use. Non-axial beat. Should be carried out before use running-turn, first through 20% of the rated current operation and then power off after a few seconds, repeated several times. In the running-in, the magnetic powder from the top of the filler, the situation in the barrier below the excitation current gradually turning into the side. If it is a long time for not using the Magnetic powder clutch, it should be stored in a dry and clean place.
Physical photo:
Order details:
Related Products
Certifications
FAQ
1.When can I get the quotation?
We usually quoted within 24 hours after receiving your inquiry. If you are very urgent to get the price, please call us or tell us in your email, so that we can regard your inquiry priority.
2.How should I place an order?
Please let us know the model number based on our specs for powder clutch, powder brake, air clutch, air brake, electromagnetic clutch, electromagnetic brake and safety chucks, other transmisson parts.
For air shafts,air adapter please show us your drawing, or let us know your request, and then we will provide you drawing for confirmation.
3.What’s your MOQ basis?
Normally, we don’t have MOQ request, except the customized mini clutches/brakes.
4.What about the lead time for production?
Honestly, it depends on the order quantity and the type of our products. For powder clutch, powder brake, tension controller,which is about 3-5 days. For safety chucks, air shafts which need about 15-30days.
5.What is the term of shipment?
We can arrange with EXW, FOB, CIF…etc. You can choose the most convenient one or cost-effective way.
More concerned for our products , please do not hesitate to inquiry now!